Veneer`s Quality and Drying Capacity Remain Good

Introduction 

The veneers move through the veneer dryer in several layers along roll tubes. The target moisture level after drying by continuous veneer jet dryer is around 6–7% which is precisely the right moisture level for gluing veneer for plywood making machine. A sufficient drying temperature is 175–180 °C and the veneers pass through the wood veneer drying machine in about six minutes. Drying veneer conditions and the moisture of the veneers are monitored continuously to make sure that the drying quality remains even.

One of the outstanding features of Shine Roller Veneer Dryer is saving dry cost for the core veneer dryer and face veneer dryer users and plywood drying factories. The composite cost of drying the veneer is only $6-$12 per cubic meter, which is the lowest among the traditional wood veneer drying machines. The biomass burner, also known as the furnace, can burn all kinds of waste wood directly. The combustion cost of waste wood is much lower than that of coal, gas and electric heating. The biomass burner can provide hot air to the wood veneer dryer without needing steam boiler or conduction oil boiler.

Biomass Type Veneer Jet Dryer Pictures

Technical Parameter for Biomass Veneer Jet Dryer 

Shine Company Introduction