Home > Products > Veneer Dryer > Veneers are Fed into the Roller Dryer in Sheets

Veneers are Fed into the Roller Dryer in Sheets

Category：

Veneer Dryer
Brand：

SHINE
Browse number：

4258
Release time：

2020-03-03 18:33:35
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

Introduction

The veneer is dried using a roller veneer jet dryer, which means that the veneer ribbon is cut into sheets after peeling. Another option for drying would be a mesh veneer dryer, in which the veneer is fed into the drying machine as a continuous ribbon directly from the peeling line. The benefit of roller drying is that flawed pieces can be removed from the process even before drying, in which case the veneer’s quality and drying capacity remain good. After drying, the dried veneer is flat, with no buckle or end waviness. And the surface is in good condition before gluing for the plywood process.

veneer dryer scheme drawing .jpg

Shine Veneer Drying Machine Pictures

4Deck Veneer Dryer

Wood Veneer Dryer

Roller Veneer Dryer.jpg 10 Ton Biomass Burner

Technical Parameter for Shine Veneer Drying Machine

Parameter Model	DHS44M	DHS48M	DHS52M	DHS56M	DHS60M
Work width（m）	3	3	3	3	3
Layer	2	2	2	2	2
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	40	44	44	48	52
Cooling area (m)	4	4	4+4	4+4	4+4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10
Drying capacity (m³/h)	2.7-3.1	3-3.3	3.2-3.5	3.5-3.8	3.8-4.1
Heat exhaustion（10000 kcal）	94.5-108.5	105-115.5	112-122.5	122-132	132-143
Traction motor power(kw)	5.5*2	*7.52**	7.5*2	7.5*2	7.5*2
Hot air fan power (kw)	11*10	*1111**	11*11	11*12	11*13
Air cooling fan power（kw）	11	11	11*2	11*2	11*2
Total power (kw)	132	147	158	169	180
Overall size LxWxH（m）	44*4.5	*484.5**	52*4.5	56*4.5	60*4.5