Core Veneer Roller Dryer is widely used to dry the wood core veneer by veneer drying machine. Shine veneer dryer has most advantages of saving cost to the most.The veneer after drying is flat,has uniform moisture content and without buckle or waviness.4deck veneer dryer with automatic veneer feeding machine,which is continous feeding and drying,so the efficient is very high. The plywood veneer dryer with biomass burner elimates the heat loss by directly heating air and supplying to the veneer dryer.The lowest drying cost is as low as $6-$12 per cbm.
Parameter Model |
DHS20M
| DHS24M | DHS28M | DHS32M | DHS36M | DHS40M |
Work width(m) | 3 | 3 | 3 | 3 | 3 | 3 |
Deck | 1 | 1 | 1 | 1 | 1 | 1 |
Veneer thickness(mm) | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area (m)
| 16 | 20 | 24 | 28 | 32 | 36 |
Cooling area (m) | 4 | 4 | 4 | 4 | 4 | 4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 0.5-0.65 | 0.65-0.8 | 0.8-1 | 1-1.2 | 1.15-1.35 | 1.3-1.5 |
Heat exhaustion(10000 kcal) | 17.5-23 | 23-28.5 | 28-35 | 35-42 | 40.25-47.25 | 45.5-52.5 |
Traction motor power(kw) | 7.5 | 7.5 | 5.5 | 5.5 | 5.5 | 5.5 |
Hot air fan power (kw) | 7.5*4 | 7.5*5 | 7.5*6 | 7.5*7 | 7.5*8 | 7.5*9 |
Air cooling fan power(kw) | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
Total power (kw) | 45 | 52.5 | 58 | 65.5 | 73 | 80.5 |
Overall size LxWxH(m) | 20*4.5 | 24*4.5 | 28*4.5 | 32*4.5 | 36*4.5 | 40*4.5 |
1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.
2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.
3.Shine roller veneer dryer covers a small area, less ancillary equipment, convenient for transportation, quick installation, and can be put into use quickly and conveniently.
4.Standardized production models, can make different sections or decks according to different capacity requirements, which can meet different customers' requirements.
5.Each section with heat exchanger, which can make full use of the heat and achieve the best drying effect.
6.All the fans are with converter motor, which can guarantee the service life of the dryer.
Copyright By © Shandong Shine Machinery Co.,Ltd