Types of Veneer Dryers Introduction
By far the most common veneer dryer is the direct-fired or steam- or hot water-heated progressive conveyor type. The roller conveyor is used most commonly with rotary-cut veneer. A wire-mesh conveyor is used for drying continuous ribbons of rotary-cut veneer and for sliced and half-round veneer. It permits feeding the veneer sidewise so that the sheets can be kept in sequence for matching, in contrast to the roller dryer where the sheets are fed endwise. The wire-mesh conveyor is reported to work most satisfactorily with a restraint weight of about 5 pounds per square foot (24 kg. per sq. m.) when drying thin face veneer. In a roller dryer, the rollers are general ly hollow tubes that rest directly on the veneer. As reported earlier, both the roller conveyor and the wire-mesh conveyor can contribute to drying by conduction of heat directly to the surface of the veneer.
Veneer Drying Machine Main Pictures
Technical Parameter for Veneer Drying Machine
Parameter Model |
DHS44M
| DHS48M | DHS52M | DHS56M | DHS60M |
Work width(m) | 3 | 3 | 3 | 3 | 3 |
Layer | 2 | 2 | 2 | 2 | 2 |
Veneer thickness(mm) | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area (m)
| 40 | 44 | 44 | 48 | 52 |
Cooling area (m) | 4 | 4 | 4+4 | 4+4 | 4+4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 2.7-3.1 | 3-3.3 | 3.2-3.5 | 3.5-3.8 | 3.8-4.1 |
Heat exhaustion(10000 kcal) | 94.5-108.5 | 105-115.5 | 112-122.5 | 122-132 | 132-143 |
Traction motor power(kw) | 5.5*2 | 7.5*2 | 7.5*2 | 7.5*2 | 7.5*2 |
Hot air fan power (kw) | 11*10 | 11*11 | 11*11 | 11*12 | 11*13 |
Air cooling fan power(kw) | 11 | 11 | 11*2 | 11*2 | 11*2 |
Total power (kw) | 132 | 147 | 158 | 169 | 180 |
Overall size LxWxH(m) | 44*4.5 | 48*4.5 | 52*4.5 | 56*4.5 | 60*4.5 |
Copyright By © Shandong Shine Machinery Co.,Ltd