Steam Heated Thermal Oil Heated or Waste Wood Fired Biomass Burner Roller Dryer Introduction
The veneer roller dryer produced by Shine Machinery can be heated with steam boiler, thermal oil heater, natural gas burner or waste wood fired biomass burner. Among them, the biomass burner is the lowest drying cost veneer roller drying machine compared with other types roller dryers.
Shine veneer dryer plays a very important role in the plywood production line. Veneer roller dryer is very suitable for wet clipping processing and drying thick veneer. Veneer drying machine equipped with automatic veneer, veneer collection and biomass burner has been used for effective and quality drying veneers with low energy consumption.The 2deck wood veneer dryer has different heating sections and cooling section.The capacity requirement of 56m dryer can dry about 90m³ for 24 hours per day.
Shine 2Deck Veneer Dryers
Technical Parameter for Shine 2Deck Veneer Dryers
Parameter Model |
DHS44M
| DHS48M | DHS52M | DHS56M | DHS60M |
Work width(m) | 3 | 3 | 3 | 3 | 3 |
Layer | 2 | 2 | 2 | 2 | 2 |
Veneer thickness(mm) | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area (m)
| 40 | 44 | 44 | 48 | 52 |
Cooling area (m) | 4 | 4 | 4+4 | 4+4 | 4+4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 2.7-3.1 | 3-3.3 | 3.2-3.5 | 3.5-3.8 | 3.8-4.1 |
Heat exhaustion(10000 kcal) | 94.5-108.5 | 105-115.5 | 112-122.5 | 122-132 | 132-143 |
Traction motor power(kw) | 5.5*2 | 7.5*2 | 7.5*2 | 7.5*2 | 7.5*2 |
Hot air fan power (kw) | 11*10 | 11*11 | 11*11 | 11*12 | 11*13 |
Air cooling fan power(kw) | 11 | 11 | 11*2 | 11*2 | 11*2 |
Total power (kw) | 132 | 147 | 158 | 169 | 180 |
Overall size LxWxH(m) | 44*4.5 | 48*4.5 | 52*4.5 | 56*4.5 | 60*4.5 |
Copyright By © Shandong Shine Machinery Co.,Ltd