The roller veneer dryer produced by Shine Machinery has the advantage that the rollers can flatten and iron the dried veneer very flat no waviness. It is the roller that can solve the customers concerns on the finish situation of the dried veneer. Shine veneer continuous roller dryer is a new generation wood veneer drying equipment. By adopting latest international pressure contact veneer drying technology, Shine roller veneer dryer has the advantage of simple operation, safety and practicality, stable operation and others. Unique heat exchange structure and biomass burner are our patented products, which can improve the drying efficiency and save the drying cost greatly.
Shine 3 Deck Veneer Dryer Pictures
Shine veneer dryers run without thermal oil or steam. It uses tree barks from debarker, waste veneer from peeling machine in wet condition as the fuel for the biomass burner. All these tree barks, waste veneer are put into a crusher or chipper and then loaded into the biomass burner even in wet condition. The burner can burn all kinds of waste wood chips, waste veneer chips, other rind directly to generate hot air to dry the green veneers. The fuel cost is the lowest compared to the steam, oil, gas or electrictity. And energy efficiency is very high as a result of direct heating instead of indirect heating of steam, oil.
Parameter Model |
GTH30-30
|
Work width(m) | 3 |
Layer | 3 |
Veneer thickness(mm) | 0.5-5 |
Heating area (m)
| 26 |
Cooling area (m) | 4 |
Initial water content(%) | 50-80 |
Finished water content(%) | 10 |
Drying capacity (m³/h) | 65-75 |
Traction motor power(kw) | 4*3 |
Hot air fan power (kw) | 5.5*13 |
Air cooling fan power(kw) | 5.5*2 |
Air intake fan power(kw) | 11*1 |
4 ton biomass burner | 18Kw |
Automatic veneer feeder(optional) | 24.2kw |
Automatic veneer collecting system(optional) | 6.2kw |
Total power (kw) | 153.7KW |
Actual electricity consumption | About 90-100kw per hour |
Copyright By © Shandong Shine Machinery Co.,Ltd