Four Deck Veneer Roller Dryer

Shine veneer roller dryer is a very important machine in the process of making plywood. The veneer dried by roller dryer is flat, no buckle or end waviness. The moisture content is uniform and veneers are in good condition before gluing. Shine biomass veneer dryer is widely valued for the lowest operation cost, high drying capacity, and energy-efficient as well as high-quality veneer output. It is meant for drying the Core Veneer & Face Veneer and is the Dryer of choice all over the country as well as abroad. The composite drying cost of biomass veneer dryer is about USD 10/m3 including the labor cost, fuel cost and electricity power. 

Adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve an ideal drying effect.

The biomass burner is Shine patented product. It can burn all kinds of waste wood directly to reduce the drying cost
mostly. Compared to steam type or heat conduction oil type veneer dryer, the drying cost is reduced greatly.

Heat exchanger adopts step by step heat transfer, and the specifications of each section of the are different, and the hot air in the heat exchanger can be uniformly emitted to the veneer. The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing.

1. The biomass burner, a patented product independently developed by our company, can directly use crushed wood waste as fuel to provide a heat source for the dryer, which is energy-saving and environmentally friendly, and greatly reduces the drying cost.
2. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste. It has obtained the national invention patent.
3. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
4. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
5. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
6. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
7. We have a professional R&D team which can design different models according to customer’s special requirement.
8. The perfect after-sale service team can supply 24 hours online service.