Home > Products > Veneer Dryer > Core Wood Veneer Roller Dryers

Core Wood Veneer Roller Dryers

Category：

Veneer Dryer
Brand：

SHINE
Browse number：

371
Release time：

2024-03-18 14:59:26
E-mail:info@sdshinemachinery.com

Detailed Description

Core Wood Veneer Roller Dryers are produced by Shandong Shine Machinery Co., Ltd, which is one economic veneer dryer. It can burn all kinds of waste wood to reduce the fuel cost to the most. Biomass fuel dryer is suitable for core veneer, face veneer. The veneer after drying is flat and smooth, the moisture can be dried to 0. Shine veneer dryer is equipped with an automatic control system with the merits of saving labor cost, easy operation, and low failure rate. A continuous automatic feeding system makes drying efficiency very high and reduces labor cost greatly.

Wood Veneer Roller Dryer

The veneer dryer is driven by the chain to run the upper and lower rollers, relying on the upper roller to press the veneer to run. Biomass combustion furnace is used to burn wood chips, waste wood and other materials at high temperature. Materials boil and fluidize in the burner to provide heat energy to the veneer dryer.For process the surface veneer and long core veneer, this veneer dryer can avoid the break of the veneer, then can raise the veneer utilization ratio and production output.

veneer dryer

Product Parameters of Wood Veneer Roller Dryers

Model No	GTH30-28
Working Width	3.0m
Deck	4
Roller material	Q235B, φ102 special shaft tube
Heating area length	24m
Cooling area length	4m
Veneer thickness and size	0.8-8mm
Veneer water moisture	Fresh veneer to about 8-10%
Heating material & drying temperature	Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.
Drying capacity (m³/day)	80-85
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power: 4KW（24pc）
Traction motor	Power: 5.5KW，frequency control（4pc）
Cold air blower	Power: 4KW（4pc）
Air intake fan	Power: 11KW（1pc）
10 ton biomass burner	Power: 16.5KW
Total power	161.5KW
Actual electricity consumption	About 114kwh per hour
Overall Dimension(LWH)	43m×12m×3.5m