Home > Products > Veneer Dryer > Continuous Veneer Jet Roller Dryer

Continuous Veneer Jet Roller Dryer

Category：

Veneer Dryer
Brand：

SHINE
Browse number：

363
Release time：

2024-03-13 14:06:45
E-mail:info@sdshinemachinery.com

Detailed Description

Continuous veneer jet roller dryer can run on not only a steam boiler or thermal oil heater but also the biomass burner or waste wood-fired burner. It is a unique roller veneer dryer heated by a biomass burner. Unlike traditional steam-type veneer dryers or thermal oil heater veneer dryers, the biomass roller dryer has features of lower composite veneer drying cost, more veneer drying output, less energy consumption, and raw material usage and waste. The composite veneer drying cost of a biomass veneer dryer is about USD 12/m3 including the labor cost, fuel cost, and electric power.

veneer jet roller dryer

Product Parameters of veneer jet roller dryer

Model No	GTH30-36
Working Width	3.0m
Deck	4
Roller material	Q235B, φ102 special shaft tube
Heating area length	32m
Cooling area length	4m
Veneer thickness and size	0.8-8mm
Veneer water moisture	Fresh veneer to about 8-10%
Heating material & drying temperature	Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.
Drying capacity (m³/day)	110
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power: 4KW（32pc）
Traction motor	Power: 5.5KW，frequency control（4pc）
Cold air blower	Power: 4KW（4pc）
Air intake fan	Power: 15KW（2pc）
10 ton biomass burner	Power: 16.5KW
Total power	276.5KW
Actual electricity consumption	About 195kwh per hour
Overall Dimension(LWH)	47m×11m×3.5m