Veneer Drying and Moisture Content Introduction
An essential part of the veneer-producing process is to dry the veneer. This varies from a minimum of drying of products - such as bushel baskets and fruit containers to bring the veneer below a moisture content at which it will mold (about 20 pct.) to drying of softwood veneers that are to be glued with a phenolic hot-press glue, in which case the veneer must be 5 percent or lower in moisture content. In between are such products as decorative face veneer, which is generally dried to a moisture content of about 8 to 10 percent, and commercial hardwood veneers that are to be glued with a urea glue, in which case the desired moisture content in the veneer is 6 to 8 percent. In all cases, a major criterion is to dry the veneer at the lowest total cost.
Veneer Drying Machine Main Pictures
Technical Parameter for Veneer Drying Machine
Parameter Model |
DHS44M
| DHS48M | DHS52M | DHS56M | DHS60M |
Work width(m) | 3 | 3 | 3 | 3 | 3 |
Layer | 2 | 2 | 2 | 2 | 2 |
Veneer thickness(mm) | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area (m)
| 40 | 44 | 44 | 48 | 52 |
Cooling area (m) | 4 | 4 | 4+4 | 4+4 | 4+4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 2.7-3.1 | 3-3.3 | 3.2-3.5 | 3.5-3.8 | 3.8-4.1 |
Heat exhaustion(10000 kcal) | 94.5-108.5 | 105-115.5 | 112-122.5 | 122-132 | 132-143 |
Traction motor power(kw) | 5.5*2 | 7.5*2 | 7.5*2 | 7.5*2 | 7.5*2 |
Hot air fan power (kw) | 11*10 | 11*11 | 11*11 | 11*12 | 11*13 |
Air cooling fan power(kw) | 11 | 11 | 11*2 | 11*2 | 11*2 |
Total power (kw) | 132 | 147 | 158 | 169 | 180 |
Overall size LxWxH(m) | 44*4.5 | 48*4.5 | 52*4.5 | 56*4.5 | 60*4.5 |
Copyright By © Shandong Shine Machinery Co.,Ltd