Home > Products > Veneer Dryer > DHS36M 2 Deck Plywood Dryer Machine

DHS36M 2 Deck Plywood Dryer Machine

Category：

Veneer Dryer
Brand：

SHINE
Browse number：

5587
Release time：

2019-09-17 10:13:34
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

DHS36M 2 Deck Plywood Dryer Machine Descripion

DHS36M 2 Deck wood veneer drying machine is normall model plywood veneer drying machine for plywood produciton . The capacity is about 50-60cbm per day for different moisture veneers. Roller veneerdryer is the main equipment for the production of plywood, also known as roller veneer dryer. The moisture content of the fresh veneer is very high. The environmental veneer dryer machine is mainly used for the drying of veneers. It is an economical method to reduce the moisture content of the veneer to minimize the loss of the plate and meet the veneer requirements of dry veneer process. Environmental veneer dryer equipment is composed of transmission room, drying room, cooling room and other parts. This equipment highlights less investment and cost-effective advantages. It defines the new concept of high-tech products. This environmental veneer dryer effectively solves the difficult issues such as hard to dry, long drying cycle, uneven drying, easy to crack, deformation and low yield and other problems during the drying process.

wood veneer

Main Technical Parameter for Core Roller Plywood Drying Line

Parameter Model	DHS20M	DHS24M	DHS28M	DHS32M	DHS36M	DHS40M
Work width（m）	3	3	3	3	3	3
Deck	2	2	2	2	2	2
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	16	20	24	28	32	36
Cooling area (m)	4	4	4	4	4	4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10	10
Drying capacity (m³/h)	0.8-1.1	1.1-1.4	1.5-1.8	1.8-2.2	2-2.5	2.4-2.7
Heat exhaustion（10000 kcal）	28-38.5	38.5-49	52.5-63	63-77	70-87.5	84-94.5
Traction motor power(kw)	5.5*2	5.5*2	5.5*2	5.5*2	*5.52**	5.5*2
Hot air fan power (kw)	11*4	11*5	11*6	11*7	*118**	11*9
Air cooling fan power（kw）	11	11	11	11	11	11
Total power (kw)	66	77	88	99	110	121
Overall size LxWxH（m）	20*4.5	24*4.5	28*4.5	32*4.5	*364.5**	40*4.5

Core Veneer Dryer Operation Principle

Roller Veneer dryer is one of the main equipment in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content even after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption.Core roller veneer dryer machine is widely accepted by world plywood production manufacturers.

Company Information

company profile.jpg