Continuous Veneer Jet Roller Dryer
Core Wood Veneer Roller Dryer is the key machine in making high quality veneer and plywood process. The veneer after drying by the Shine veneer dryer is smooth and the moisture content is uniform, the high-temperature rollers have direct contact with the wet veneer for heat transfer, the heat efficiency is high, the heat loss is small, and the heat loss is reduced. The selling price for veneer dried by roller veneer dryer is higher than natural air drying. The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve an ideal drying effect.
Advantages of Continuous Veneer Jet Roller Dryer
1.The biomass burner, a patented product independently developed by our company, can directly use crushed wood waste as fuel to provide a heat source for the dryer, no need to buy a steam boiler or thermal oil heater again. which is energy-saving and environmentally friendly, and greatly reduces the drying cost. The comprehensive drying cost for one cubic meter is about $10 lower than the thermal oil heater or steam boiler.
2.The temperature inside the burner is 40-60℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180℃, which shortens the drying time and increases the veneer drying output.
3.The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste. It has obtained the national invention patent.
4.The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
5.After drying, the veneer is smooth, no cracks, wrinkles or end ripples.
6.Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
7.We have a professional R&D team that can design different models according to customers' special requirements.
8.The perfect after-sale service team can supply 24 hours online service.
Product Parameters of Continuous Veneer Jet Roller Dryer
Model No | GTH30-36 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 32m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 50-60cbm |
Veneer transport speed | 5-22m/min,16A chain |
Hot air blower | Power:5.5KW(8pc) |
Traction motor | Power: 7.5KW,frequency control(2pc) |
Cold air blower | Power: 5.5KW(1pc) |
Air intake fan | Power : 7.5KW(2pc) |
4 ton biomass burner | Power: 16.5KW |
Total power | 92KW |
Actual electricity consumption | About 65kwh per hour |
Covered Space of the whole machine | 42M X 9M X 3M |
Customer Case
Certification
The Factory
Our Services
Pre-sale services:
1) Provide the free consultation of all plywood production line
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory.
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment.
3) Train the first-line operator.
After sale services:
1) 24 hours online service.
2) Provide the VIDEO with Install and debug the equipment.
3) Provide technical exchanging(Technical phone:+8615806625431)Door to door service is possible.
Copyright By © Shandong Shine Machinery Co.,Ltd