The 20m-60m timber core veneer plywood dryer produced by Shandong Shine Machinery Co., Ltd. is widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer.the timber core veneer plywood dryer is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel. and can quickly achieve the heat required by the timber core veneer plywood dryer.Roller Veneer dryer is one of the main equipment in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content even after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption.
Parameter Model |
DHS20M
| DHS24M | DHS28M | DHS32M | DHS36M | DHS40M |
Work width（m） | 3 | 3 | 3 | 3 | 3 | 3 |
Deck | 1 | 1 | 1 | 1 | 1 | 1 |
Veneer thickness（mm） | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area （m）
| 16 | 20 | 24 | 28 | 32 | 36 |
Cooling area (m) | 4 | 4 | 4 | 4 | 4 | 4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 0.5-0.65 | 0.65-0.8 | 0.8-1 | 1-1.2 | 1.15-1.35 | 1.3-1.5 |
Heat exhaustion（10000 kcal） | 17.5-23 | 23-285 | 28-35 | 35-42 | 40.25-47.25 | 45.5-52.5 |
Traction motor power(kw) | 7.5 | 7.5 | 5.5 | 5.5 | 5.5 | 5.5 |
Hot air fan power (kw) | 7.5*4 | 7.5*5 | 7.5*6 | 7.5*7 | 7.5*8 | 7.5*9 |
Air cooling fan power（kw） | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
Total power (kw) | 45 | 52.5 | 58 | 65.5 | 73 | 80.5 |
Overall size LxWxH（m） | 20*4.5 | 24*4.5 | 28*4.5 | 32*4.5 | 36*4.5 | 40*4.5 |
Parameter Model |
DHS44M
| DHS48M | DHS52M | DHS56M | DHS60M |
Work width（m） | 3 | 3 | 3 | 3 | 3 |
Deck | 1 | 1 | 1 | 1 | 1 |
Veneer thickness（mm） | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area （m）
| 40 | 44 | 44 | 48 | 52 |
Cooling area (m) | 4 | 4 | 4+4 | 4+4 | 4+4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 1.5-1.7 | 1.65-1.8 | 1.7-1.9 | 1.8-2 | 1.9-2.2 |
Heat exhaustion（10000 kcal） | 52.5-59.5 | 57.75-63 | 59.5-66.5 | 63-70 | 66.5-77 |
Traction motor power(kw) | 5.5 | 7.5 | 7.5 | 7.5 | 7.5 |
Hot air fan power (kw) | 7.5*10 | 7.5*11 | 7.5*11 | 7.5*12 | 7.5*13 |
Air cooling fan power（kw） | 7.5 | 7.5 | 7.5*2 | 7.5*2 | 7.5*2 |
Total power (kw) | 88 | 97.5 | 105 | 112.5 | 120 |
Overall size LxWxH（m） | 44*4.5 | 48*4.5 | 52*4.5 | 56*4.5 | 60*4.5 |
1. Q: Are you a factory or a trading company?
A: We are a factory who manufacture the machine by ourselves.
2. Q: What is the delivery time?
A: Normally will be 30 days after getting deposit or original LC.
3. Q: What is the maintenance period? What kinds of after-sale service do you support?
A: 1 year after delivery. We supply telephone after-sale service, video service and e-mail service. If can not deal with the problem, our tech-staff will go abroad to service.
4. Q:What is the payment terms?
A:a.T/T(30% deposit, 70% before delivery in FOB or 70% paid against copy of B/L in CFR)
b. 100% irrevocable L/C at sight.
5. Q: Can we visit your factory?
A: Welcome to visit us! Everyday we have customers from different countries. By now, we have exported to more than 50 countries customer.
Copyright By © Shandong Shine Machinery Co.,Ltd
ไทย
Indonesia
Melayu
Tiếng Việt
Pусский
Portugues
Français
Deutsch
日本語
한국어
العربية
Italiano
Polski
Nederlands
Türk dili
हिन्दी
Ελληνικά
Svenska
Español
