Roller Veneer Dryer Operating Systems

Roller Veneer Dryer Introduction

Shine Machinery can supply different drying capacities veneer roller dryers in terms of length from 20m to 60m, decks from one(single) deck to four decks. The main operating systems of the roller veneer plywood dryer are as follows:

1.Drying system: roller veneer dryer adopts the most scientific drying principle, and the hot air in the hot air stove is injected directly into the upper and lower bellows of the machine by centrifugal blower. The hot air blows to the upper and lower sides of the running veneer through the nozzles of the upper and lower bellows, so that the veneer is heated evenly and thus plays the role of drying 

2.Control system: adopt endless gearbox to adjust feed speed according to your veneer thickness and moisture content to achieve the ideal drying effect.

3.Transmission system: the veneer is fed into the machine through the feed inlet vertically, and the chain drives the upper and lower rows of rollers, running relatively. The veneer moves forward by the self-weight pressure of the upper roll, and during the veneer passes through the two rollers and the upper and lower air nozzles, it achieves the effect of drying and ironing. So the veneer dried by this machine is flat, smooth and without marks.

4. Heating system: Steam heating, heat conduction oil heating, hot stove type heating，waste wood or other biomass materials. Users can choose one.

Technical Parameter for Roller Veneer Dryer