Home > Products > Veneer Dryer > Plywood Veneer Dryer

Plywood Veneer Dryer

Shine plywood veneer dryer is of high quality and efficiency and is the best choice for plywood veneer drying.Roller type wood veneer dryer can keep the veneer smooth and has uniform moisture content after drying. The output of veneer with the thickness of 0.5-5mm through veneer drying machine. Waste wood and other waste bark can be used as the fuels for thiccoreveneer drying line, saving the cost significantly. The composite cost is about only USD 6-12/cubic meter. Our biomass burner of plywood veneer dryer can use waste wood as fuel ,which is environmental,saving energy,reduce cost and also there is no any smoke. 

Plywood Veneer Dryer


1. This model is a straight-through horizontal circulation roller veneer dryer. Its thermal cycle design draws on the advantages of advanced European dryer technology, and adopts an upright centrifugal fan with a volute (flow rate of 45,000 to 62,000 m3/ h).

2. The new type of heat exchanger and the rectangular variable-section spray box make the high-speed jet airflow acting on the surface of the veneer uniform. The hot air blowers in the heating chambers in the front and rear areas are arranged separately from left to right, so as to ensure that the dried veneer obtains a consistent final moisture content at each point.

3.In order to adapt to the humid tropical climate, the length of the cooling open section is appropriately lengthened to facilitate the cooling of the dried veneer and reduce the phenomenon of damp return.

Plywood Veneer Dryer

Product Parameters of Plywood Veneer Dryer

Model No


Working Width




Roller material

Q235B, φ89 steel pipe

Heating area length


Cooling area length


Veneer thickness


Veneer water moisture

Fresh veneer to about 10%

Heating material & drying temperature

Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/24h)


Veneer transport speed

5-22m/min16A chain

Hot air blower


Traction motor

Power: 7.5KWfrequency control2pc

Cold air blower

Power: 5.5KW1pc

Air intake fan

Power : 11KW2pc

6 ton biomass burner

Power: 16.5KW

Total power


Actual electricity consumption

About 87.5kwh per hour

Covered Space of the whole machine

58M X 9M X 3M

Customer Case

Customer Case

The Factory

The Factory

Packaging & Shipping

Packaging & Shipping

Please feel free to give your inquiry in the form below.
Plywood Veneer Dryer
Plywood Veneer Dryer
Click for details