The face wood veneer drying machine produced by Shandong Shine Machinery Co., Ltd. is widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer. the face wood veneer drying machine is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel. and can quickly achieve the heat required by the face wood veneer drying machine . the operation principle for the Shine face wood venner dryer are as follows: Roller Veneer dryer is one of the main equipment in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content even after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption
Parameter Model |
DHS44M
| DHS48M | DHS52M | DHS56M | DHS60M |
Work width（m） | 3 | 3 | 3 | 3 | 3 |
Deck | 1 | 1 | 1 | 1 | 1 |
Veneer thickness（mm） | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area （m）
| 40 | 44 | 44 | 48 | 52 |
Cooling area (m) | 4 | 4 | 4+4 | 4+4 | 4+4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 1.5-1.7 | 1.65-1.8 | 1.7-1.9 | 1.8-2 | 1.9-2.2 |
Heat exhaustion（10000 kcal） | 52.5-59.5 | 57.75-63 | 59.5-66.5 | 63-70 | 66.5-77 |
Traction motor power(kw) | 5.5 | 7.5 | 7.5 | 7.5 | 7.5 |
Hot air fan power (kw) | 7.5*10 | 7.5*11 | 7.5*11 | 7.5*12 | 7.5*13 |
Air cooling fan power（kw） | 7.5 | 7.5 | 7.5*2 | 7.5*2 | 7.5*2 |
Total power (kw) | 88 | 97.5 | 105 | 112.5 | 120 |
Overall size LxWxH（m） | 44*4.5 | 48*4.5 | 52*4.5 | 56*4.5 | 60*4.5 |
1) Provide the free consultation of the equipment
2) Provide the standard device and the flow chart
3) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
4) Welcome to visit our factory
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
Copyright By © Shandong Shine Machinery Co.,Ltd
ไทย
Indonesia
Melayu
Tiếng Việt
Pусский
Portugues
Français
Deutsch
日本語
한국어
العربية
Italiano
Polski
Nederlands
Türk dili
हिन्दी
Ελληνικά
Svenska
Español
