52m 2 Deck Roller Veneer Dryer Machine for plywood making

Category：

2 Deck Plywood Veneer Dryer
Brand：

SHINE
Browse number：

8609
Release time：

2018-05-18 14:10:07
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

Introduction of 52m 2 Deck Roller Veneer Dryer Machine

52m 2 deck wood plywood veneer dryer is popular roller veneer dryer machine line. the capacity of DHS52M core veneer dryer machine is about 80cbm per day. Shine Machinery roller plywood veneer dryer also can be designed 1 deck or 3 deck according to different customers' requirements. Normally if the capacity requirement of the roller veneer dryer machine is high . user will choose 2 deck or 3 deck veneer dryer . The main advantages of the 2 deck roller veneer drying machine is that it can save areas and improve working capacity.The veneer dryer produced by Shandong Shine Machinery Co., Ltd. is widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer.It is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel. and can quickly achieve the heat required by the dryer.

layout drawing(1)(1).png

Operation Principle of Shine Roller Veneer Drying Line

Roller veneer dryer machine is one of the main equipment in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content even after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption.

Main Technical Parameter for Shine DHS52M Roller Veneer Dryer and Others

Parameter Model	DHS44M	DHS48M	DHS52M	DHS56M	DHS60M
Work width（m）	3	3	3	3	3
Layer	2	2	2	2	2
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	40	44	44	48	52
Cooling area (m)	4	4	4+4	4+4	4+4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10
Drying capacity (m³/h)	2.7-3.1	3-3.3	3.2-3.5	3.5-3.8	3.8-4.1
Heat exhaustion（10000 kcal）	94.5-108.5	105-115.5	112-122.5	122-132	132-143
Traction motor power(kw)	5.5*2	7.5*2	*7.52**	7.5*2	7.5*2
Hot air fan power (kw)	11*10	11*11	*1111**	11*12	11*13
Air cooling fan power（kw）	11	11	*112**	11*2	11*2
Total power (kw)	132	147	158	169	180
Overall size LxWxH（m）	44*4.5	48*4.5	*524.5**	56*4.5	60*4.5