Home > Products > Built-in Combustion Furnace Veneer Drying Machine > 2 Deck Built-in Furnace Veneer Drying

    2 Deck Built-in Furnace Veneer Drying

  • Category:
    Built-in Combustion Furnace Veneer Drying Machine
  • Brand:
    SHINE
  • Browse number:
    7306
  • Release time:
    2019-07-24 10:06:49
  • E-mail:info@sdshinemachinery.com
  • INQUIRY

Shine Built-in Furnace Roller Veneer Dryer Introduction 

Built-in combustion furnace roller veneer dryer is one kind of Shine roller veneer drying machine .   the capacity for 2 deck built-in furnace roller veneer dryer is  from 36 to 100cbm per day . the length can be 20-60m,also we can design special models according to customer's special requirements. the main features of the built-in combustion furnace roller veneer drying machine  are that the furnace is built in toghether with the microwave dryer body. no need extra burner . it can not only save area for the users , but can save the equipment cost also . the cost is lower compared to external burner.  the heating material for the built-in combustion furnace veneer dryer can be coal, waste wood and others.The plywood veneer dryer line produced by Shandong Shine Machinery Co., Ltd. is  widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer.  Except for the built-in combustion furnace roller veneer dryer ,Shine Machinery also produce other types veneer dryer, such as biomass roller veneer dryer, steam heating veneer drying machine,heat conduction oil veneer dryer .electricity heating veneer dryer line  and etc. 

veneer dryer scheme drawing .jpg

Working Principle of the Roller Veneer Dryer 

operating system:The planer (rotary) cutting veneer is fed into the inlet of the jet roller type veneer dryer, and through the relative rotation of several pairs of upper and lower rollers located inside the dryer, the planing veneer moves forward in a predetermined direction, and in the course of the veneer travel,The hot wind of 110-150 degrees Celsius is sprayed vertically to the upper and lower surfaces of the veneer by the nozzle located between the two pairs of rollers with the wind speed of V=1.5M/S. Under the control of the electronic control system, the optimal travel speed is adjusted to achieve the best drying effect.And the uneven veneer, after the relative rotation of the upper and lower rollers,can reach the effect of ironing veneer.

Heat medium obtain types of Jet Roller veneer Dryer :External Type Biomass Burner, Built-in Burner, Hot blast stove Type: the air injection roller type veneer dryer produced by our factory is specially equipped with energy saving and high efficiency hot blast stove considering that the user does not have the choice of steam type machine.The working principle of the hot blast stove is to produce high temperature by burning waste wood or raw coal from the veneer factory through the hot blast stove. Under the action of a high speed rotating fan in the machine, the hot air is sent to the nozzle located in the machine and then the strong injection is passed through the nozzle.Spray the hot air onto the upper and lower surfaces of the veneer in operation, so as to achieve the effect of drying.

Electronic control system:The frequency conversion control system of the jet roller type veneer dryer adjusts the travel speed according to the thickness and moisture content of the veneer in order to achieve the best drying effect.

Dehumidifying system :The dehumidifying system of the ejector roller veneer dryer is operated by a number of dehumidify holes located in the machine, through the adjustment of the valve, and adopt the function of the automatic damp removing system or the mechanical strong dehumidifying system  to achieve the best effect of humidity discharge.

Sealing thermal insulation system: In order to achieve best drying efficiency of the ejector roller veneer dryer, the shell of the machine is insulated by the shell with thickness of 75MM-100MM, so as to achieve the heat in the machine and no loss of air volume.Thus to achieve the most ideal sealing and insulation effect.

Main Technical Parameter for 2 Deck  Roller Veneer Dryer Line 



Parameter

Model

 

DHS20M

 

DHS24M

DHS28M

DHS32M

DHS36M

DHS40M

Work widthm

3

3

3

3

3

3

Deck

2

2

2

2

2

2

Veneer  thickness(mm

0.5-5

0.5-5

0.5-5

0.5-5

0.5-5

0.5-5

Heating area (m

 

16

20

24

28

32

36

Cooling area (m)

4

4

4

4

4

4

Initial water content(%)

50-80

50-80

50-80

50-80

50-80

50-80

Finished water content(%)

10

10

10

10

10

10

Drying capacity (m³/h)

0.8-1.1

1.1-1.4

1.5-1.8

1.8-2.2

2-2.5

2.4-2.7

Heat exhaustion10000 kcal

28-38.5

38.5-49

52.5-63

63-77

70-87.5

84-94.5

Traction motor power(kw)

5.5*2

5.5*2

5.5*2

5.5*2

5.5*2

5.5*2

Hot air fan power (kw)

11*4

11*5

11*6

11*7

11*8

11*9

Air cooling fan power(kw

11

11

11

11

11

11

Total power (kw)

66

77

88

99

110

121

Overall size LxWxHm

20*4.5

24*4.5

28*4.5

32*4.5

36*4.5

40*4.5



Parameter

Model

 

DHS44M

 

DHS48M

DHS52M

DHS56M

DHS60M

Work   widthm

3

3

3

3

3

Layer  

2

2

2

2

2

Veneer  thicknessmm

0.5-5

0.5-5

0.5-5

0.5-5

0.5-5

Heating   area m

 

40

44

44

48

52

Cooling   area (m)

4

4

4+4

4+4

4+4

Initial   water content(%)

50-80

50-80

50-80

50-80

50-80

Finished   water content(%)

10

10

10

10

10

Drying   capacity (m³/h)

2.7-3.1

3-3.3

3.2-3.5

3.5-3.8

3.8-4.1

Heat   exhaustion10000   kcal

94.5-108.5

105-115.5

112-122.5

122-132

132-143

Traction   motor power(kw)

5.5*2

7.5*2

7.5*2

7.5*2

7.5*2

Hot   air fan power (kw)

11*10

11*11

11*11

11*12

11*13

Air   cooling fan powerkw

11

11

11*2

11*2

11*2

Total   power (kw)

132

147

158

169

180

Overall   size LxWxHm

44*4.5

48*4.5

52*4.5

56*4.5

60*4.5


More Pictures About Shine Plywood Veneer Dryer 

Company Introduction and Shipment Built-in Wood Veneer Dryer

Veneer Dryer

Veneer Dryer

Thailand Veneer Dryer for Sale



Container Shipment.jpgCertification.jpg





Condition: New
Dryer Type: Roller Type Veneer Dryer
Certification: CE.ISO
Please feel free to give your inquiry in the form below.
2 Deck Built-in Furnace Veneer Drying
2 Deck Built-in Furnace Veneer Drying
Click for details
*Subject:
Name:
Phone:
*E-mail:
Address:
*Content:

RELATED PRODUCTS

No search results found!