Shine 56m 2deck Veneer Roller Dryer Introduction
Shine 56m 2deck dryer is composed of 52m heating section and 4m cooling section.The fresh veneer is fed into the dryer and moved through the dryers by running rollers and at the same time, the hot air blows the surface and back of the veneer to achieve the drying effect.High-temperature roller drum directly contact with wet veneer for heat transfer,the drying capacity of 56m 2deck dryer can achieve about 90-100 m³for 24 hours per day. So the heat efficiency is high, heat loss is reduced.The veneer after drying has uniform moisture content,flat without buckle or end waviness and the surface is in good condition for gluing.
Shine 56m 2deck Veneer Roller Dryer Pictures
Technical Parameter for Shine 56m 2deck Veneer Roller Dryer
Parameter Model |
DHS44M
| DHS48M | DHS52M | DHS56M | DHS60M |
Work width(m) | 3 | 3 | 3 | 3 | 3 |
Layer | 2 | 2 | 2 | 2 | 2 |
Veneer thickness(mm) | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area (m)
| 40 | 44 | 44 | 48 | 52 |
Cooling area (m) | 4 | 4 | 4+4 | 4+4 | 4+4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 2.7-3.1 | 3-3.3 | 3.2-3.5 | 3.5-3.8 | 3.8-4.1 |
Heat exhaustion(10000 kcal) | 94.5-108.5 | 105-115.5 | 112-122.5 | 122-132 | 132-143 |
Traction motor power(kw) | 5.5*2 | 7.5*2 | 7.5*2 | 7.5*2 | 7.5*2 |
Hot air fan power (kw) | 11*10 | 11*11 | 11*11 | 11*12 | 11*13 |
Air cooling fan power(kw) | 11 | 11 | 11*2 | 11*2 | 11*2 |
Total power (kw) | 132 | 147 | 158 | 169 | 180 |
Overall size LxWxH(m) | 44*4.5 | 48*4.5 | 52*4.5 | 56*4.5 | 60*4.5 |
Copyright By © Shandong Shine Machinery Co.,Ltd