Major composition of Shine Roller Veneer Drying Machine

2019-08-06 14:10:02

The roller veneer drying machine produced by Shandong Shine Machinery Co., Ltd. is  widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer.

It is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel.  and can quickly achieve the heat required by the dryer. Shine roller veneer dryer machine are mainly composed of the folllowing systems:

1.Drying system:the roller veneer dryer  adopts the most scientific drying principle ,and the hot air in the hot air stove is injected directly into the upper and lower bellows of the machine by centrifugal blower. The hot air blows to the upper and lower sides of the running veneer through the nozzles of the upper and lower bellows , so that the veneer is heated evenly and thus plays the role of drying

2.Control system: adopt endless gearbox to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.

3.Transmission system:the veneer is fed  into the machine through the feed inlet vertically, and the chain drives the upper and lower rows of rollers, running relatively. The veneer moves forward by the self-weight pressure of the upper roll, and during the veneer passes through the two rollers and the upper and lower air nozzles, it achieves the effect of drying and ironing. So the veneer dried by this machine is flat, smooth and without marks.

4.Heating system:Steam heating, heat conduction oil heating, hot stove type heating，waste wood or other biomass materials. Users can choose one.