Rubber Veneer Roller Dryer On Sale
Shine veneer roller dryer running on biomass burner with automatic feeder and collection system was installed and operated in Hainan. The roller dryer is mainly used to dry rubber wood veneer in the local area. Usually the rubber veneer is needed to be dried immediately after peeling and moisture content reduced to 0 moisture content by the biomass roller dryer. Later, the rubber veneer moisture content will gradually become around 5 degree. The heat medium of Shine wood veneer dryer can be waste wood and waste bark etc. Veneer drying machine equipped with biomass burner,which can burn all kinds of biomass materials directly to reduce fuel cost mostly.The composite cost is only about USD 6-12 per cubic meter. The veneer dryers machine can be divided into two parts: heating section and cooling section. All the instruction can be operated in switch board. We can design face veneer dryer as customer`s project requirement.
Shine High Efficiency Veneer Drying Equipment Pictures
Technical Parameter for High Efficiency Drying Veneer Equipment
Parameter Model |
DHS44M
| DHS48M | DHS52M | DHS56M | DHS60M |
Work width(m) | 3 | 3 | 3 | 3 | 3 |
Layer | 2 | 2 | 2 | 2 | 2 |
Veneer thickness(mm) | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area (m)
| 40 | 44 | 44 | 48 | 52 |
Cooling area (m) | 4 | 4 | 4+4 | 4+4 | 4+4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 2.7-3.1 | 3-3.3 | 3.2-3.5 | 3.5-3.8 | 3.8-4.1 |
Heat exhaustion(10000 kcal) | 94.5-108.5 | 105-115.5 | 112-122.5 | 122-132 | 132-143 |
Traction motor power(kw) | 5.5*2 | 7.5*2 | 7.5*2 | 7.5*2 | 7.5*2 |
Hot air fan power (kw) | 11*10 | 11*11 | 11*11 | 11*12 | 11*13 |
Air cooling fan power(kw) | 11 | 11 | 11*2 | 11*2 | 11*2 |
Total power (kw) | 132 | 147 | 158 | 169 | 180 |
Overall size LxWxH(m) | 44*4.5 | 48*4.5 | 52*4.5 | 56*4.5 | 60*4.5 |
Copyright By © Shandong Shine Machinery Co.,Ltd