Roller Veneer Dryer Machine for Plywood Making

Roller Veneer Dryer Machine Description

Shine roller veneer drying machine can be from 20m to 60 m . 1-3 deck. normally 4m is one section.  we also can design special ones for different customers' requirements.  The main components of Shine veneer drying equipment is as follows:1.Drying system :the veneer dryer  adopts the most scientific drying principle ,and the hot air in the hot air stove is injected directly into the upper and lower bellows of the machine by centrifugal blower. The hot air blows to the upper and lower sides of the running veneer through the nozzles of the upper and lower bellows, so that the veneer is heated evenly and thus plays the role of drying 2.Control system: Adopt endless gearbox to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect. 3.Transmission system :the veneer is fed  into the machine through the feed inlet vertically, and the chain drives the upper and lower rows of rollers, running relatively. The veneer moves forward by the self-weight pressure of the upper roll, and during the veneer passes through the two rollers and the upper and lower air nozzles, it achieves the effect of drying and ironing. So the veneer dried by this machine is flat, smooth and without marks. 4.Heating system:Steam heating, heat conduction oil heating, hot stove type heating，waste wood or other biomass materials. Users can choose one.                            

Main Technical Parameter for DHS32M Roller Veneer Dryer Machine 

Roller Veneer Dryer Operation Principle 

Roller Veneer dryer is one of the main equipment in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot

air continuous roller press is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is

clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and

blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content even

after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and

reducing heat energy consumption.

More Pictures About Shine Roller Veneer Dryer