Waste wood fuel roller veneer dryer is the most popular one of shine veneer dryers. the capaicty of the DHS48M 2 deck roller timber veneer plywood dryer is about 80cbm per day . Shine also can supply other capacity roller veneer dryers from about 16cbm to 100cbm per day. Veneer dryer is the main equipment for the production of plywood, also known as timber roller veneer plywood dryer. The moisture content of the fresh veneer is very high. The veneer drying machine is mainly used for the drying of veneers. It is an economical method to reduce the moisture content of the veneer to minimize the loss of the plate and meet the veneer requirements of dry veneer process. Veneer dryer is composed of transmission room, drying room, cooling room and other parts. This equipment highlights less investment and cost-effective advantages. It defines the new concept of high-tech products. This environmental veneer dryer effectively solves the difficult issues such as hard to dry, long drying cycle, uneven drying, easy to crack, deformation and low yield and other problems during the drying process. compared to other type veneer dryer . the best advantage of the waste wood veneer drying machine is that the fuel cost is low and can make full use of the waste wood of the peeling machine, which can also save space for the users.
Parameter Model |
DHS44M
| DHS48M | DHS52M | DHS56M | DHS60M |
Work width（m） | 3 | 3 | 3 | 3 | 3 |
Layer | 2 | 2 | 2 | 2 | 2 |
Veneer thickness（mm） | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area （m）
| 40 | 44 | 44 | 48 | 52 |
Cooling area (m) | 4 | 4 | 4+4 | 4+4 | 4+4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 2.7-3.1 | 3-3.3 | 3.2-3.5 | 3.5-3.8 | 3.8-4.1 |
Heat exhaustion（10000 kcal） | 94.5-108.5 | 105-115.5 | 112-122.5 | 122-132 | 132-143 |
Traction motor power(kw) | 5.5*2 | 7.5*2 | 7.5*2 | 7.5*2 | 7.5*2 |
Hot air fan power (kw) | 11*10 | 11*11 | 11*11 | 11*12 | 11*13 |
Air cooling fan power（kw） | 11 | 11 | 11*2 | 11*2 | 11*2 |
Total power (kw) | 132 | 147 | 158 | 169 | 180 |
Overall size LxWxH（m） | 44*4.5*2.27 | 48*4.5*2.27 | 52*4.5*2.27 | 56*4.5*2.27 | 60*4.5*2.27 |
1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.
2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.
3.Shine roller veneer dryer covers a small area, less ancillary equipment, convenient for transportation, quick installation, and can be put into use quickly and conveniently.
4.Standardized production models, can make different sections or decks according to different capacity requirements, which can meet different customers' requirements.
5.Each section with heat exchanger, which can make full use of the heat and achieve the best drying effect.
6.All the fans are with converter motor, which can guarantee the service life of the dryer.
RELATED
Copyright By © Shandong Shine Machinery Co.,Ltd
ไทย
Indonesia
Melayu
Tiếng Việt
Pусский
Portugues
Français
Deutsch
日本語
한국어
العربية
Italiano
Polski
Nederlands
Türk dili
हिन्दी
Ελληνικά
Svenska
Español
