Introduction Of Wood Dryer

Introduction of DHS56M  Rotary Dryer for Wood Chips  

52m 2 deck wood plywood veneer rotary  dryer  is one  popular roller veneer dryer machine line.  the capacity of DHS52M core veneer dryer machine is about 80-90cbm per day. Shine Machinery roller plywood  veneer dryer  also can be designed 1 deck or 3 deck according to different customers' requirements. Normally if the capacity requirement of the  roller veneer dryer machine  is high . user will choose 2 deck or 3 deck veneer dryer .  The main advantages of the 2 deck roller veneer drying machine is that it can save areas and improve working capacity.The veneer dryer produced by Shandong Shine Machinery Co., Ltd. is  widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer.It is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel.  and can quickly achieve the heat required by the dryer.

Operation Principle of Shine Roller Veneer Drying Line 

Rotary plywood veneer dryer machine is one of the main equipment in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and  blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content even after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption.

Main Technical Parameter for Shine DHS52M Roller Veneer Dryer and Others

Shipment of Shine Roller Veneer Dryer Machine