High Quality Veneer Drying Machine
veneer drying machine can directly use crushed wood waste, tree bark as fuel to provide hot air to the veneer dryer, which greatly reduces the drying cost and is energy-saving and environmentally friendly at the same time. No need to buy a steam boiler or thermal oil heater. The temperature in the burner is 40-60℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-200 ℃, which shortens the drying time and increases the output.
The veneer after drying has a uniform moisture content, is flat, has no buckle or end waviness, good surface condition before gluing. The rollers use φ102 steel pipe. The bearings of the 4 deck veneer dryer are featured high temperature 500 degree Celsius resistance and low temperature -20 degree Celsius resistance, which no need inject oil and easy maintenance in the daily operation.
Product Parameter of Veneer Drying Machine
Model No | GTH30-28 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 24m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 80-85 |
Veneer transport speed | 5-22m/min,16A chain |
Hot air blower | Power: 4KW(24pc) |
Traction motor | Power: 5.5KW,frequency control(4pc) |
Cold air blower | Power: 4KW(4pc) |
Air intake fan | Power: 11KW(1pc) |
10 ton biomass burner | Power: 16.5KW |
Total power | 161.5KW |
Actual electricity consumption | About 114kwh per hour |
Overall Dimension(L*W*H) | 43m×12m×3.5m |
Customer Case
Certification
The Factory
Packaging & Shipping
Copyright By © Shandong Shine Machinery Co.,Ltd