Home > Products > Face Veneer Drying Machine > Face Wood Veneer Drying Machine Introduction

Face Wood Veneer Drying Machine Introduction

Category：

Face Veneer Drying Machine
Brand：

SHINE
Browse number：

6768
Release time：

2019-11-28 12:51:03
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

Face Wood Veneer Drying Machine Introduction

Wood Veneer dryer machine is the important machine in the process of producting plywood and suitable for the technology of dry.It has the merits of high efficiency,saving energy and good drying quality because of adopting new high technology and advanced control technology.Veneer roller dryer with biomass burner is environmental with no smoke,low emission and high quality,low energy consumption ang high output. Automatic veneer feeding machine for veneer dryer is a newly designed product by Shine Machinery Co,.ltd.It can highly impove the working efficiency and save labor cost for the veneer production factory.Shine machinery wood veneer dryer and other products are also popular items and gain good reputation from clients.

veneer dryer scheme drawing .jpg

Main Technical Parameter for Face Wood Veneer Dryer

Parameter Model	DHS20M	DHS24M	DHS28M	DHS32M	DHS36M	DHS40M
Work width（m）	3	3	3	3	3	3
Deck	1	1	1	1	1	1
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	16	20	24	28	32	36
Cooling area (m)	4	4	4	4	4	4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10	10
Drying capacity (m³/h)	0.5-0.65	0.65-0.8	0.8-1	1-1.2	1.15-1.35	1.3-1.5
Heat exhaustion（10000 kcal）	17.5-23	23-285	28-35	35-42	40.25-47.25	45.5-52.5
Traction motor power(kw)	7.5	7.5	5.5	5.5	5.5	5.5
Hot air fan power (kw)	7.5*4	7.5*5	*7.56**	7.5*7	7.5*8	7.5*9
Air cooling fan power（kw）	7.5	7.5	7.5	7.5	7.5	7.5
Total power (kw)	45	52.5	58	65.5	73	80.5
Overall size LxWxH（m）	20*4.5	24*4.5	*284.5**	32*4.5	36*4.5	40*4.5

Main Operation principle of Shine Face Wood Veneer Dryer

Fave wood roller Veneer dryer is one of the main equipment in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content eve after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption.