Home > Products > Veneer Dryer > 4 Deck veneer dryer


Shine veneer roller dryer is a very important machine in the process of making plywood. The veneer dried by roller dryer is flat, no buckle or end waviness. The moisture content is uniform and veneers are in good condition before gluing. Shine biomass veneer dryer is widely valued for the lowest operation cost, high drying capacity, and energy-efficient as well as high-quality veneer output. It is meant for drying the Core Veneer & Face Veneer and is the Dryer of choice all over the country as well as abroad. The composite drying cost of biomass veneer dryer is about USD 10/m3 including the labor cost, fuel cost and electricity power.

Model No.

GTH30-38

Type

Veneer Roller Dryer

Application

Core Veneer Drying

Number of Sections

8

Number of Decks

4

Working Width

3000mm

Roller material

Q235B, φ89 steel pipe

Heating section length

34m

Cooling section length

4m

Veneer thickness

0.6-8mm;

Initial moisture content

50-80%

Final moisture content

10%(adjustable based on the requirement)

Heating material & drying temperature

Waste wood, 120-180℃ adjustable

Drying capacity (m³/h)

6 m³/h

Heat Requirement (10000 Kcal/h)

65

Veneer delivery speed

5-22m/min (adjustable)

Hot air fan

Power: 7.5KW(8pc)

Cold air fan

Power: 7.5KW(1pc)

Air intake fan

Power: 11KW(1pc)

Traction motor

Power: 5.5KW frequency control (1pc)

2 Ton Biomass Burner

Power: 15KW

Total power

123KW

Actual Electricity Consumption

About 69Kw per hour

Overall Dimensions (L*W*H)

53X9X3.5m

All specifications, dimensions & design characteristics are subject to change without prior notice.

Details Images





Adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve an ideal drying effect.







The biomass burner is Shine patented product. It can burn all kinds of waste wood directly to reduce the drying cost
mostly. Compared to steam type or heat conduction oil type veneer dryer, the drying cost is reduced greatly.




Heat exchanger adopts step by step heat transfer, and the specifications of each section of the are different, and the hot air in the heat exchanger can be uniformly emitted to the veneer. The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing.


Recommend Products

Recommended by seller

wood veneer peeling machine plywood spindleless veneer peeling lathe machine

$15,000.00 / Set

1 Set


china plywood machinery spindleless veneer peeling machine

$35,000.00 / Set

1 Set


Best Service 18 Layer 800ton Plywood Hot Press Machine For Core Veneer

$57,000.00 / Set

1 Set


China Supply Core Veneer Dryer Machine 20m One Deck Mesh Dryer

$46,000.00 / Set

1 Set


Wire Rope Veneer Dryer Machine For Face Veneer

$40,000.00 / Set

1 Set


Wood Veneer Drying Machine 40m Vertical Core Veneer Dryer

$56,000.00 / Set

1 Set


Woodworking Wood Veneer Drying Roller Face Veneer Dryer Machine

$150,000.00 / Set

1 Set


China supplier core veneer 22m three deck roller veneer dryer machine

$132,000.00 / Bag

1 Bag


Company Profile

Why Choose Us

1. The biomass burner, a patented product independently developed by our company, can directly use crushed wood waste as fuel to provide a heat source for the dryer, which is energy-saving and environmentally friendly, and greatly reduces the drying cost.
2. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste. It has obtained the national invention patent.
3. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
4. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
5. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
6. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
7. We have a professional R&D team which can design different models according to customer’s special requirement.
8. The perfect after-sale service team can supply 24 hours online service.

Product packaging

FAQ


Related tags:
Please feel free to give your inquiry in the form below.
4 Deck veneer dryer
4 Deck veneer dryer
Click for details
*Subject:
Name:
Phone:
*E-mail:
Address:
*Content:

RELATED PRODUCTS

No search results found!