Gas-fired Integrated Veneer Dryer Introduction

2018-05-24 15:35:55

Use combustible gases such as natural gas and coal gas as media. The generated flue gas is processed by the heat transfer structure independently developed by our company. The drying blower and the heat transfer hot air are directly blown into the air pipe to dry the veneer. The heat energy is directly used by 100%, and the drying temperature is high (drying room maintaining 200 ℃), there are two major advantages of saving fuel (without any external heat emission, and all the heat is concentrated in the drying room). Analysis of coal consumption: Semi-dry veneer is dried in 26 meter-long dryer equipment, 80-100 m³of veneer cost about 400-500 kg of coal.The fresh veneer is dried in a 26 meter-long drying zone, 80-100 cubic meters of veneer cost about 100-700kg of coal.Conventional dryers generally use independent hot air stoves as heat sources, consume large quantities of coal, consume large amounts of electricity. They are environmentally polluted, have  large volume, complex structure, high drying cost, low utilization of thermal energy, large power consumption of the whole machine and high manufacturing cost.